Charmed Kubernetes on AWS

Charmed Kubernetes will run seamlessly on AWS. With the addition of the aws-integrator and its companion charms, your cluster will also be able to directly use AWS native features.

AWS integrator

The aws-integrator charm simplifies working with Charmed Kubernetes on AWS. Using the credentials provided to Juju, it acts as a proxy between Charmed Kubernetes and the underlying cloud, granting permissions to dynamically create, for example, EBS volumes.

AWS K8S Storage

The aws-k8s-storage charm moves the AWS specific functions of the EBS csi-driver out-of-tree. Using this charm, the drivers are installed as workloads in the Kubernetes cluster instead of as natural code paths of the Kubernetes binaries.

AWS Cloud Provider

The aws-cloud-provider moves the AWS specific functions of the cloud-provider out-of-tree. The AWS cloud provider provides the interface between a Kubernetes cluster and AWS service APIs. This project allows a Kubernetes cluster to provision, monitor and remove AWS resources necessary for operation of the cluster.

Version support

From Kubernetes 1.27

The in-tree cloud-provider is no longer available, and must be deployed as container workloads in the cluster. Charmed Kubernetes recommends using the aws-cloud-provider charm to access AWS Service APIs.

Prior to Kubernetes 1.27

The in-tree cloud-provider is natively available in Kubernetes until the 1.27 release, and it is not necessary to deploy the aws-cloud-provider charm as in the above overlay.

Installing

If you install Charmed Kubernetes [using the Juju bundle][install], you can add the aws-integrator at the same time by using the following cloud-provider overlay file ([download it here][asset-aws-overlay]):

description: Charmed Kubernetes overlay to add native AWS support.
applications:
  aws-integrator:
    charm: aws-integrator
    num_units: 1
    trust: true
  aws-cloud-provider:
    charm: aws-cloud-provider
relations:
  - ['aws-integrator', 'kubernetes-control-plane']
  - ['aws-integrator', 'kubernetes-worker']
  - ["aws-cloud-provider:certificates",            "easyrsa"]
  - ["aws-cloud-provider:kube-control",            "kubernetes-control-plane"]
  - ["aws-cloud-provider:external-cloud-provider", "kubernetes-control-plane"]
  - ["aws-cloud-provider:aws-integration",         "aws-integrator"]

As well as the storage overlay file ([download it here][asset-aws-storage-overlay]):

description: Charmed Kubernetes overlay to add native AWS support.
applications:
  kubernetes-control-plane:
    options:
      allow-privileged: "true"
  aws-integrator:
    charm: aws-integrator
    num_units: 1
    trust: true
  aws-k8s-storage:
    charm: aws-k8s-storage
    trust: true
    options:
      image-registry: public.ecr.aws
relations:
- ['aws-k8s-storage:certificates', 'easyrsa:client']
- ['aws-k8s-storage:kube-control', 'kubernetes-control-plane:kube-control']
- ['aws-k8s-storage:aws-integration', 'aws-integrator:aws']
# Include the following relations if not using the aws-cloud-provider charm
# - ['aws-integrator', 'kubernetes-control-plane']
# - ['aws-integrator', 'kubernetes-worker']

To use these overlays with the Charmed Kubernetes bundle, it is specified during deploy like this:

juju deploy charmed-kubernetes --overlay ~/path/aws-overlay.yaml --overlay ~/path/aws-storage-overlay.yaml --trust

… and remember to fetch the configuration file!

juju ssh kubernetes-control-plane/leader -- cat config > ~/.kube/config

For more configuration options and details of the permissions which the integrator uses, please see the [charm readme][aws-integrator-readme].

Using EBS volumes

Many pods you may wish to deploy will require storage. Although you can use any type of storage supported by Kubernetes (see the [storage documentation][storage]), you also have the option to use the native AWS storage, Elastic Block Store (EBS).

Beginning in Kubernetes 1.25

The aws-k8s-storage charm will need to be installed to make use of EBS Volumes. Amazon removed CSIMigration away from the in-tree binaries but made them available as container workload in the cluster. This charm installs and relates to the existing integrator charm.

A StorageClass will be created by this charm named csi-aws-ebs-default

You can confirm this has been added by running:

kubectl get sc

which should return:

NAME                  PROVISIONER       RECLAIMPOLICY   VOLUMEBINDINGMODE      ALLOWVOLUMEEXPANSION   AGE
csi-aws-ebs-default   ebs.csi.aws.com   Delete          WaitForFirstConsumer   false                  9s

Prior to Kubernetes 1.25

First we need to create a storage class which can be used by Kubernetes. To start with, we will create one for the ‘General Purpose SSD’ type of EBS storage:

kubectl create -f - <<EOY
apiVersion: storage.k8s.io/v1
kind: StorageClass
metadata:
  name: ebs-gp2
provisioner: kubernetes.io/aws-ebs
parameters:
  type: gp2
EOY

You can confirm this has been added by running:

kubectl get sc

which should return:

NAME      PROVISIONER             AGE
ebs-gp2   kubernetes.io/aws-ebs   39s

You can create additional storage classes for the other types of EBS storage if needed, simply give them a different name and replace the ‘type: gp2’ with a different type (See the [AWS website][ebs-info] for more information on the available types).

Creating a PVC

To actually create storage using this new class, you can make a Persistent Volume Claim:

kubectl create -f - <<EOY
kind: PersistentVolumeClaim
apiVersion: v1
metadata:
  name: testclaim
spec:
  accessModes:
    - ReadWriteOnce
  resources:
    requests:
      storage: 100Mi
  storageClassName: ebs-gp2
EOY

This should finish with a confirmation. You can check the current PVCs with:

kubectl get pvc

…which should return something similar to:

NAME        STATUS   VOLUME                                     CAPACITY   ACCESS MODES   STORAGECLASS   AGE
testclaim   Bound    pvc-54a94dfa-3128-11e9-9c54-028fdae42a8c   1Gi        RWO            ebs-gp2        9s

This PVC can then be used by pods operating in the cluster. As an example, the following deploys a busybox pod:

kubectl create -f - <<EOY
apiVersion: v1
kind: Pod
metadata:
  name: busybox
  namespace: default
spec:
  containers:
    - image: busybox
      command:
        - sleep
        - "3600"
      imagePullPolicy: IfNotPresent
      name: busybox
      volumeMounts:
        - mountPath: "/pv"
          name: testvolume
  restartPolicy: Always
  volumes:
    - name: testvolume
      persistentVolumeClaim:
        claimName: testclaim
EOY
<span class="p-notification__title">Note:</span>
<p class="p-notification__message">If you create EBS volumes and subsequently tear down the cluster, check with the AWS console to make sure all the associated resources have also been released.</p>

Using ELB Loadbalancers

With the aws-integrator charm in place, actions which invoke a loadbalancer in Kubernetes will automatically generate an AWS Elastic Load Balancer. This can be demonstrated with a simple application. Here we will create a simple application and scale it to five pods:

kubectl create deployment hello-world --image=gcr.io/google-samples/node-hello:1.0
kubectl scale deployment hello-world --replicas=5

You can verify that the application and replicas have been created with:

kubectl get deployments hello-world

Which should return output similar to:

NAME              READY   UP-TO-DATE   AVAILABLE   AGE
hello-world      5/5               5                            5             2m38s

To create a LoadBalancer, the application should now be exposed as a service:

kubectl expose deployment hello-world --type=LoadBalancer --name=hello --port 8080

To check that the service is running correctly:

kubectl describe service hello

…which should return output similar to:

Name:                     hello
Namespace:                default
Labels:                   run=load-balancer-example
Annotations:              <none>
Selector:                 run=load-balancer-example
Type:                     LoadBalancer
IP:                       10.152.183.134
LoadBalancer Ingress:     ad5fc7750350611e99768068a686bb67-239702253.eu-west-1.elb.amazonaws.com
Port:                     <unset>  8080/TCP
TargetPort:               8080/TCP
NodePort:                 <unset>  31203/TCP
Endpoints:                10.1.13.4:8080,10.1.13.5:8080,10.1.35.8:8080 + 2 more...
Session Affinity:         None
External Traffic Policy:  Cluster
Events:                   <none>

You can see that the LoadBalancer Ingress is now associated with an ELB address in front of the five endpoints of the example deployment. Leaving a while for DNS propagation, you can test the ingress address:

curl  http://ad5fc7750350611e99768068a686bb67-239702253.eu-west-1.elb.amazonaws.com:8080
Hello Kubernetes!
Note:

If you create ELBs and subsequently tear down the cluster, check with the AWS console to make sure all the associated resources have also been released.

</div> </div> ### Upgrading the charms The charm `aws-integrator`, `aws-cloud-provider` and `aws-k8s-storage` can be refreshed within the current charm channel without concern and can be upgraded at any time with the following command, ```bash juju refresh aws-integrator juju refresh aws-cloud-provider juju refresh aws-k8s-storage ``` It isn't recommended to switch charm channels unless a full charm upgrade is planned. ### Troubleshooting If you have any specific problems with the aws-integrator, you can report bugs on [Launchpad][bugs]. The aws-integrator charm makes use of IAM accounts in AWS to perform actions, so useful information can be obtained from [Amazon's CloudTrail][cloudtrail], which logs such activity. For logs of what the charm itself believes the world to look like, you can use Juju to replay the log history for that specific unit: ```bash juju debug-log --replay --include aws-integrator/0 ``` ## See also: If you are an AWS user, you may also be interested in how to [use AWS IAM for authorisation and authentication][aws-iam]. [asset-aws-overlay]: https://raw.githubusercontent.com/charmed-kubernetes/bundle/main/overlays/aws-overlay.yaml [asset-aws-storage-overlay]: https://raw.githubusercontent.com/charmed-kubernetes/bundle/main/overlays/aws-storage-overlay.yaml [quickstart]: /kubernetes/docs/quickstart [storage]: /kubernetes/docs/storage [ebs-info]: https://aws.amazon.com/ebs/features/ [cloudtrail]: https://console.aws.amazon.com/cloudtrail/ [bugs]: https://bugs.launchpad.net/charmed-kubernetes [aws-integrator-readme]: https://charmhub.io/containers-aws-integrator [aws-iam]: /kubernetes/docs/aws-iam-auth [install]: /kubernetes/docs/install-manual

We appreciate your feedback on the documentation. You can edit this page or file a bug here.